Select "Boat brg from 0" or "Boat rng from 0"

This will give you the range/bearing of boat X from your boat.

Ian W wrote:

Thanks for bread crumb trail through the wood .... now I know what to look for I found them and can use when in AIS tracking range

Back to my questions on analysing/presenting/displaying YBT data similarly when out of AIS range (Q5 and Q6)   .... can you help with this?
 

AFAIK there is no way to do this with the YB pos reports. The only work around that I can think of is to export reports from specific times and use excel to calculate change in range/bearing/dtf etc between reports. 
 

Re Q1 ... I did what you suggested and can step through with weather controls but limited to 60minute step and nothing shorter?.
Ian,
Settings > Weather > Display > Animation Interval (min)
allows you to set the 'step' time
Ernie
 

Thanks for all the help so far as I really want to master all the tracking and race relative position options (AIS and YBT). Sticking to YBT

Ernie's guide gave me clue to allow stepping through on display the historic YBT positions in shorter time steps. Got this one.

I understand I can't time display range, bearing etc that is available in the window. Is there a way to export all the info and time steps is a CSV file so that we could use excel outside Expedition for time plot? 

There is an export button but only exports displayed time step as CSV. Could use this to export each time step and consolidate outside Expedition but would of course be quicker if we could export whole data file in one CSV

The raw YBT data is available is single file from YBT JSON but this does not have all the derived calcs on relative positions/differences/gains etc that Expedition nicely provides

I have and use Wills books .... I will look for Peter Isler video

Is there an answer to my YBT Expedition info (range, gain etc) export question ?