Hi
once and for all, i will now try to connect Expedition successfully to raymarine instruments; there are loads of boats with raymarine instruments up here in Norway, and i have to be able to connect sooner or later. 4 years of failing has to come to an end.

i have scrolled through your excellent forum to find answer to my question, but i find nothing that helps me solve this exactly.

the current victim is a boat with quite new instruments, so i assumed this should be a good starting point. i have raymarine instruments all the way
- i70 displays
- axiom pro 9s plotter
- seatlak - stng converter
- raymarine iTC5 converter
- acu-200 autopilot

so i plugged myself into the white seatalk NG plug in the rack with my newly acquired actisense NGT-1.
in expedition connections, i used the actisense-ngt-1 menu choice. (should i use something else?)
i got some signals, compass and gps, but no wind data. raw data window said wind data was sent.
notes:
- the baudrate set in expedition connection was different from the one dafault in the ngt-1 device manager. i tried to change to make them identical, both ways, didn't help.
- there were several racks with connectors, tried several, but there should be no difference? white connector is good.... no wiring diagram. looking at my pictures, i see i have a free white connection at the iTC5 converter...
 - latest driver installed "the device is working properly"

pictures in dropbox; https://www.dropbox.com/sh/j9yww59e9as6vs5/AAA17RkV9AqFuTYNR7fz8awfa?dl=0

so my question is; how do i solve this? possible? or not possible at all?

i will post the same question at the raymarine forum by the way.

best regards
silje