Offline
I have a Panasonic Tablet. Expedition is not recognizing the internal GPS. The GPS shows it is on Com 6.
Any way to point Expedition to find it?
Offline
Com 6 should be listed in the list of serial ports in Exp.
However, Exp won't be able to open it if something else has it open.
Offline
Sometimes Expedition see the GPS by getting a fix, sometimes it doesn't. I have tried booting with starting the GPS first. If I try starting the GPS after starting Expedition the GPS won start. Nothing else is using the GPS (that I know of)
Not sure what to try next.
Offline
Doers it say open or closed in the Exp interface? If closed, then something else probably has the port open.
Offline
If i start Exp first it say connection is open, then if I start the GPS, the GPS says Failed Connection and wont start.
If I start the the GPS first Exp say it is closed.
Last edited by Black Dog (4/13/2020 4:32 pm)
Offline
I presume by "Start the GPS", you mean starting the app. The symptoms above illustrate that you can only have one app opening the port at a time.
When Exp says the port is open, that is good. You should be able to see the data streaming in in the raw data window. Probably it is a NMEA 0183 connection, although baud rates can vary a little.
Offline
Got it. Looks like Exp starts the GPS program and prevents the Viewer software from starting. The GPS and Viewer must be independent from each other. I thought you needed the viewer running to get GPS data. Apparently not. Works fine with Exp now. Thanks for your help.