Expedition Navigation Software 
1 - lucsar
- Member
Offline - Registered: 2/07/2024
- Posts: 4
NGT-1 not seen by Expedition4D
I've recently bought the Actisense NGT-1 gateway but can't see it in Expedition4D. In fact, looks like it should appear under Instruments menu entry as shown here :
Note that the gateway works perfectly by sending/receiving data from NMEA using its software :
Also the version of Expedition4D I'm using is unlicensed at the moment.
- Nick
- Moderator
Offline
- Registered: 9/16/2015
- Posts: 2,969
Re: NGT-1 not seen by Expedition4D
That is a VERY old Expedition. Actisense no longer has a short-cut there.
If you go to the instruments interface (click the Instruments button), then select the serial port for the NGT-1, you should see NGT-1 as the only instrument type option.
- lucsar
- Member
Offline
- Registered: 2/07/2024
- Posts: 4
Re: NGT-1 not seen by Expedition4D
This is the version I'm using :
Still can't see any instrument there :
Yet the NGT-1 is connected and works fine with the NMEA reader :
Last edited by lucsar (2/08/2024 12:21 am)
- •
Thread Starter- Nick
- Moderator
Offline
- Registered: 9/16/2015
- Posts: 2,969
Re: NGT-1 not seen by Expedition4D
Click the Instruments button, not the menu on the right.
- lucsar
- Member
Offline
- Registered: 2/07/2024
- Posts: 4
Re: NGT-1 not seen by Expedition4D
Nothing happens (?!) the menu closes that's it
Could it be because I'm running an unlicensed version?
- •
Thread Starter- Campbell_Field
- Moderator
Offline
- From: UK
- Registered: 9/16/2015
- Posts: 238
Re: NGT-1 not seen by Expedition4D
lucsar wrote:
Nothing happens (?!) the menu closes that's it
Could it be because I'm running an unlicensed version?
Yes.
:::Campbell Field::::::www.fieldyachting.com:::
- Nick
- Moderator
Offline
- Registered: 9/16/2015
- Posts: 2,969
Re: NGT-1 not seen by Expedition4D
Yes - only licensed Expedition users get instruments.
- lucsar
- Member
Offline
- Registered: 2/07/2024
- Posts: 4
Re: NGT-1 not seen by Expedition4D
Ok, thank you
- •
Thread Starter- Black Dog
- Expert
Offline
- Registered: 9/17/2015
- Posts: 50
Re: NGT-1 not seen by Expedition4D
Hello, I am having the same problem with Exp not reconizing the NGT-1. I do have a licensed copy.
Nick refers to "Click the instrument button not the menu on the right"
Do I need to install any additional software?
Last edited by Black Dog (4/06/2024 12:07 pm)
- Nick
- Moderator
Offline
- Registered: 9/16/2015
- Posts: 2,969
Re: NGT-1 not seen by Expedition4D
Can you see it in Windows' device manager?
What does it show on the relevant serial port page in Exp?