Expedition Expedition Navigation Software

You are not logged in. Would you like to login or register?



  • Index
  •  » Networking Issues
  •  » Icom M510-TR serial connection

    • 1 of 1

     

    7/08/2023 7:26 am  #1

    Magnus86
    Contributor

    Offline

    Registered: 6/26/2019
    Posts: 9

    Icom M510-TR serial connection

    Hi,
    I have installed Icom M510-TR Ais and tries to receive AIS data via serial USB port. In other tools I can open the serial port and receive data. In Expedition the port status is open but I don't see any data in the Raw window or on the map.

    I also have had problems with sockets not being reliable, trying to connect to Zeus plotter for getting AIS data via the plotter. But H5000 websocket is stable.

    Tried to reinstall Expedition and also remove data folder, but I see that the connection settings remains. Is it stored somewhere else?

     

    7/08/2023 12:55 pm  #2

    Nick
    Moderator

    Offline

    Registered: 9/16/2015
    Posts: 2,964

    Re: Icom M510-TR serial connection

    The instrument settings are saved in Windows' registry. Expedition System restore can be used to delete those.

    Which connection type did you select. NMEA 0183 AIS is probably a best guess as the baud rate is higher.

    Check the NMEA settings are enabled to receive VDM. 

     

     

    1 of 1

  • Index
  •  » Networking Issues
  •  »  Icom M510-TR serial connection

    • Board footera

     

    Powered by Boardhost. Create a Free Forum


    Interested in advertising here? Over a thousand active navigators and Expedition users visit this forum. Click here to contact the administrator.