Expedition Expedition Navigation Software

You are not logged in. Would you like to login or register?



  • Index
  •  » Networking Issues
  •  » Reading NMEA Data with the "H690/H2000 Perf" Network Setting

    • 1 of 1

     

    6/07/2016 2:33 pm  #1

    Matador
    Expert

    Offline

    Registered: 2/24/2016
    Posts: 21

    Reading NMEA Data with the "H690/H2000 Perf" Network Setting

    H2000 with Performance Processor. NMEA feed from Performance box to laptop.

    Lots of good data coming in, as seen in the "raw data" viewer.

    However, none of it registers within the program itself -- no position data, wind data, etc.

    How could that be? What's wrong in my setup?

    Thanks!

     

    6/07/2016 3:11 pm  #2

    Nick
    Moderator

    Offline

    Registered: 9/16/2015
    Posts: 2,742

    Re: Reading NMEA Data with the "H690/H2000 Perf" Network Setting

    NMEA or HLink? What does the data look like?

     

    6/08/2016 2:40 am  #3

    benhowett
    Expert

    Offline

    Registered: 9/16/2015
    Posts: 32

    Re: Reading NMEA Data with the "H690/H2000 Perf" Network Setting

    A screenshot of the instrument settings page might be a good idea if you could post one?

    Initial thoughts are that it might be confusion between nmea and hlink as Nick suggests, I would also double check the input is set to boat 0 in Exp (you) and not boat 1 or other.

     

     

    1 of 1

  • Index
  •  » Networking Issues
  •  »  Reading NMEA Data with the "H690/H2000 Perf" Network Setting

    • Board footera

     

    Powered by Boardhost. Create a Free Forum


    Interested in advertising here? Over a thousand active navigators and Expedition users visit this forum. Click here to contact the administrator.