Expedition Navigation Software 
1 of 1
- WoobaGooba
- Expert
Offline - Registered: 1/24/2016
- Posts: 101
Importing YB Tracking into Exp for post race analysis
Folks. Is there a way to import YB tracking into Exp after an event concludes? We did not capture a full set of YB data during the event, and would like to analyze the tactics of a few of the other boats in the event. Cheers
- Nick
- Moderator
Offline
- Registered: 9/16/2015
- Posts: 2,965
Re: Importing YB Tracking into Exp for post race analysis
Use the JSON option with a suitably large number of positions
- Ernie M
- Moderator
Offline
- Registered: 11/05/2015
- Posts: 412
Re: Importing YB Tracking into Exp for post race analysis
WG,
OR... if you just didn't take the time to download your files from the Airmail acct you can do them one at a time after the race and rebuild the whole deal.
Another reason to bring the boat PC home.
Ernie
- WoobaGooba
- Expert
Offline
- Registered: 1/24/2016
- Posts: 101
Re: Importing YB Tracking into Exp for post race analysis
Nick wrote:
Use the JSON option with a suitably large number of positions
Brilliant. Worked great.
Now is there a way to step through (fwd, rev, etc.) the YB tracks just as I can with Weather data?
- •
Thread Starter- Nick
- Moderator
Offline
- Registered: 9/16/2015
- Posts: 2,965
Re: Importing YB Tracking into Exp for post race analysis
Not for the individual positions, but you could (eg) use the weather forward and reverse.
You can toggle between the grib times or a manually set time step on the weather ribbon.
Use the Sync button to set the display time to the last position for the reference boat or you can select any display time from the Race tracking window.
The newish 'Tracks to current time' might be useful
- axyl
- Expert
Offline
- Registered: 8/20/2018
- Posts: 32
Re: Importing YB Tracking into Exp for post race analysis
It should do that automatically. If you set the time, then the grib weather and boats will display.
Or, in the race tracking, select the time that you want to see position data for and then press the "set display time". (Don't forget to tick which boats you want to plot in the boats list)
1 of 1