Offline
How can I send the Alternating Channels to the three user channels in NX2 (TBS, CAD, CFD) ?
Expedition 4D 11.9.6.0
Offline
Select Garmin NX2 NMEA as the instrument type, then click the Garmin NX2 NMEA settings button.
Offline
I have done that, but cannot see any option to address the 3 user channels. I am using NMEA0183, not FDX (as this never worked with my environment), but as per manual it should work also in NMEA mode.
Offline
You need to select the Garmin NX2 NMEA option is the instrument type.