Expedition Expedition Navigation Software

You are not logged in. Would you like to login or register?

5/24/2020 1:37 am  #1

Expedition calibrations

I am using Expedition (v. 11.0.14) to send calibrated BSP to mast displays. The system is based on NMEA2000, connected through an Actisense to the PC. Masthead displays are Garmins, the rest of hardware is B&G. Numbers are sent through one of the custom channels. BSP is ticked in the dialog box "Expedition calibrations" and the matrix filled in with reasonable numbers. The manual says Exp will add these numbers to the uncalibrated BSP. This it did last year, but this year the numbers on the mast displays are silly, showing 18 knots when the boat is doing 6. I literally have done nothing but update Exp.

What am I doing wrong?

Last edited by RagnarJW (5/24/2020 4:13 am)


5/24/2020 2:45 pm  #2

Re: Expedition calibrations

Does Bsp in a number box show the same issue? Exp should be sending the same value


5/26/2020 9:34 am  #3

Re: Expedition calibrations

Thanks, Nick. Went out today to check if the number box showed the same wrong numbers, and now it works as it should, both mast display and number box. Strange.

     Thread Starter

Board footera


Powered by Boardhost. Create a Free Forum

Interested in advertising here? Over a thousand active navigators and Expedition users visit this forum. Click here to contact the administrator.