Expedition Expedition Navigation Software

You are not logged in. Would you like to login or register?



5/19/2019 5:49 am  #1


Network Open- Raw Data OK - but no connection to all data

New Digital Yacht AIT300 with WiFi.  - Mission to connect GPS and AIS to Expedition through WiFi

I successfully have Network 0 Open, Instruments chosen as "NNEA 0183 AIS", UDP to IP address connection, address 192.168.1.11, Port 2000, Use GPS data box checked, Validate Checksums box checked

I do see Raw Data coming through including RMC GGA GLL which i believer are possition reports - but I do not have any evidence that Expedition is using all the data i.e. I can see AIS targets on the chart but no GPS position fix is indicated.  It looks like dispite the fact that GPS Data box is checked that the GPS position is not beeing used by Expedition.

How do I enable GPS data behond checking the box?
Thanks

Last edited by peterbecker (5/19/2019 1:02 pm)

 

5/19/2019 1:47 pm  #2


Re: Network Open- Raw Data OK - but no connection to all data

Hello,

Can you see latitude and/or longitude in a number box?

Can you send a sample of the raw data and images of your connection pages?

 

5/19/2019 2:33 pm  #3


Re: Network Open- Raw Data OK - but no connection to all data

Nick - thanks
No Lat Long in number box
will send data by email

     Thread Starter
 

Board footera

 

Powered by Boardhost. Create a Free Forum

Zapfware North University. Racing Tactical Software - Expedition.
Online courses