I'm on a boat that has an H5000 Herc system.
The data to Expedition is NMEA 0183 over wifi via a ShipModul Multiplex 3
In Expedition, I am getting: Position, BSP, HDG, TWS, Baro.., but not TWD, TWA, or AWA
In Expedition "Sentences to receive", everything is selected.
I have only one network configured, and AIS is coming in as well.
I have not used a ShipModul before - is this a problem with how it was configured.., could it be that it was not set up to send those wind sentences?
How should  I get  the other wind  numbers  - TWD, TWA, and AWA  - into expedition?
I've attached a sample of the raw data from expedition


C,13.75,C,,,,,,T,,M,,N,,M*69
$WIMDA,30.20,I,1.023,B,23.07,C,,C,,,,,,T,,M,,N,,M*6E
$HCHDG,94.17,,,1.31,E*11
$HCHDG,80.25,,,1.31,E*15
$HCHDG,100.19,,,,*7B
$PFEC,GPatt,,+0.66,-0.58*6D
$PFEC,GPatt,,+2.26,+0.13*62
$PFEC,GPatt,,+3.04,-0.28*6D
$PFEC,GPatt,,+0.32,-0.22*61
$PFEC,GPhve,-0.17,A*24
$PFEC,GPhve,-0.01,A*23
$HCHDG,94.17,,,1.31,E*11
$HCHDG,80.25,,,1.31,E*15
$HCHDG,100.19,,,,*7B
$PFEC,GPatt,,+0.66,-0.59*6C
$PFEC,GPatt,,+2.26,+0.13*62
$PFEC,GPatt,,+3.04,-0.28*6D
$PFEC,GPatt,,+0.32,-0.23*60
$PFEC,GPhve,-0.17,A*24
$PFEC,GPhve,-0.01,A*23
$WIMWV,,R,0.00,N,A*3D
$GPRMC,105009.390,A,4333.50458,N,00404.74954,E,0.00,,160319,1.31,E,A*23
$GPRMC,105009.390,A,4333.50796,N,00404.75047,E,0.00,,160319,1.31,E,A*28
$HCHDG,94.16,,,1.31,E*10
$HCHDG,80.25,,,1.31,E*15
$HCHDG,100.19,,,,*7B
$PFEC,GPatt,,+0.67,-0.59*6D
$PFEC,GPatt,,+2.26,+0.13*62
$PFEC,GPatt,,+3.04,-0.28*6D
$PFEC,GPatt,,+0.32,-0.23*60
$PFEC,GPhve,-0.17,A*24
$PFEC,GPhve,-0.01,A*23
$TIROT,13.15,A*3D
$TIROT,8.50,A*06
$TIROT,-0.75,A*24
$VDVBW,,,A,,,A,,A,,A*51
$VDVBW,,,A,,,A,,A,,A*51
$VDVBW,,,A,,,A,,A,,A*51
$HCHDG,94.14,,,1.31,E*12 

 

Last edited by us7070 (3/16/2019 3:14 am)