ExpeditionExpedition Navigation Software


Click Here for Expedition Assistant - AI Chatbot

You are not logged in. Would you like to login or register?

4/13/2018 5:56 am  #1


Raymarine C120 chart pltter to expedition laptop?

I have older Raymarine instruments tied to a C120 chart plotter.  The chart plotter has a NEMA 0183 port currently talking to my VHF radio.  Can I just splice the output wires from the NEMA 0183 cable to the data wires of the USB cable to get boat information to my laptop/Expedition?  If I can are there settings I need to turn on so Expedition reads the information from the Raymarine Chart Plotter?  I don't care that Expedition sends information to the instruments.  I just want boat information sent to Expedition. 

  

 

4/13/2018 12:14 pm  #2


Re: Raymarine C120 chart pltter to expedition laptop?

Yes, you just need the NMEA TX and ground wires.

​I would strongly recommend an optically isolated adaptor to the computer. For example the NGW-1-USB or USG-2 from Actisense.

http://www.actisense.com/range/nmea-0183/

 

4/23/2018 3:24 am  #3


Re: Raymarine C120 chart pltter to expedition laptop?

Nick, thank you!  I purchased the Actisense USG-2.  Got it hooked up yesterday and the laptop is reading the information form the instruments.  Now I am ready to move to the next step in the learning process.  Again, Thank You for your help! 

     Thread Starter
 

Board footera




Check out RaceData for iOS and Android. Expedition data in the palm of your hand, or on your wrist! RaceData

Interested in advertising here? Over one thousand active navigators and Expedition users visit this forum. Click here to contact the administrator.