Expedition Navigation Software » Number box timing-out, displays dashes

WoobaGooba · 2/27/2018 9:56 pm

Folks. I have a sensor sending a data update to Exp every 60 seconds, then displaying the value in a number box. After data receipt, the number box will display properly for few a seconds, then display dashes. Repeat.

Anyway to prevent this behavior?

Thanks

Nick · 2/28/2018 12:49 am

The time-outs are fixed.

Which channels?

WoobaGooba · 2/28/2018 6:09 am

No idea what channel it is. The data is NMEA 0183 coming over UDP bcast into my Network 0 / Boat 0.

Last edited by WoobaGooba (2/28/2018 6:10 am)

us7070 · 2/28/2018 8:24 am

by "channel" i am pretty sure he means to ask what quantity you have chosen to display in that box...

WoobaGooba · 3/03/2018 6:06 am

In that case, channel is Barometer

Nick · 3/03/2018 11:25 am

The time-out was 30s for the barometer channel. Have changed that to 2 minutes for the next release.

WoobaGooba · 3/03/2018 5:22 pm

Thank you Nick

Index
» Questions about Expedition features
» Number box timing-out, displays dashes

2/27/2018 9:56 pm #1

Number box timing-out, displays dashes

2/28/2018 12:49 am #2

Re: Number box timing-out, displays dashes

2/28/2018 6:09 am #3

Re: Number box timing-out, displays dashes

2/28/2018 8:24 am #4

Re: Number box timing-out, displays dashes

3/03/2018 6:06 am #5

Re: Number box timing-out, displays dashes

3/03/2018 11:25 am #6

Re: Number box timing-out, displays dashes

3/03/2018 5:22 pm #7

Re: Number box timing-out, displays dashes

Index
» Questions about Expedition features
» Number box timing-out, displays dashes

Board footera