Expedition Navigation Software 
1 of 1- Ernie M
- Moderator
Offline - Registered: 11/05/2015
- Posts: 411
Optimization Results
Am I missing something?
I recently had to install Exp on a new machine. I've updated to 10.5.8 and all seems to be A-OK
However when I do an Optimization and look at the results/details the Sail column shows the same sail (J4) for all points even with different TWA TWS and even Reverse course. I went into ProgramData/Exp/Sails/Sailchart.txt and changed all the j4's to J3 and now my details show all J3's...so I know I'm in the right place.
Could I have neglected something?
Any ideas are appreciated,
Ernie
- Nick
- Moderator
Offline
- Registered: 9/16/2015
- Posts: 2,964
Re: Optimization Results
I will have a look at it this morning. Possibly it got broken by the change to support the KND sail chart.
- ZeeZee
- Expert
Offline
- Registered: 3/30/2016
- Posts: 321
Re: Optimization Results
Same result here (10.5.8): always showing J4
I don't have KND, but is case I would have had both a KND and an Exp sail chart, how can I configure which one to use for Opt routing and/or number boxes?
- ZeeZee
- Expert
Offline
- Registered: 3/30/2016
- Posts: 321
Re: Optimization Results
Maybe related: in the Exp sail chart the names of the sails (J2, J3 etc) are not always visible anymore, are shown twice or not located at the center of the sails sweet spot area.
Last edited by ZeeZee (1/22/2017 11:37 am)
- Nick
- Moderator
Offline
- Registered: 9/16/2015
- Posts: 2,964
Re: Optimization Results
Hello,
That table is fixed for the next update.
Exp used the sail chart option that is selected in the sail chart window.
- Ernie M
- Moderator
Offline
- Registered: 11/05/2015
- Posts: 411
Re: Optimization Results
Thanks Nick!
- •
Thread Starter