Expedition Navigation Software 
1 of 1- unplugged
- Expert
Offline - Registered: 4/13/2016
- Posts: 139
Wifi Instruments
For preliminary testing I setup a Raymarine RS130 GPS in my backyard. Interfaced to a vYacht WiFi multiplexor.
I have expedition interfaced to the vYacht device via Wifi. I can see NMEA Data streaming when I view Raw Data,
ex.
$GPRMC,000000,V,4052.0966,N,07322.8977,W,0.0000,288.181,000000,,*2D
$GPGSA,A,0,,,,,,,,,,,,,0.0,0.0,0.0*31
$GPRMC,000000,V,4052.0965,N,07322.8977,W,0.0000,288.181,000000,,*2E
$GPGSA,A,0,,,,,,,,,,,,,0.0,0.0,0.0*31
I however still see "NO POSITION FIX" in the lower info bar.
I unchecked "Accept GPS from DLL" in case that mattered but no change.
Any thoughts to what I am missing.
Thanks
- unplugged
- Expert
Offline
- Registered: 4/13/2016
- Posts: 139
Re: Wifi Instruments
after decoding the NMEA data it appears the GPS data is incomplete. The lat/long are correct which made me think it was reporting a valid fix.
Time to check with Raymarine
- •
Thread Starter- Nick
- Moderator
Offline
- Registered: 9/16/2015
- Posts: 2,948
Re: Wifi Instruments
The V will be an A (or D) if the data is valid.
- Crocodile
- Expert
Offline
- Registered: 4/24/2019
- Posts: 10
Re: Wifi Instruments
Attempting to connect to charter boat for RMSR...which has vyacht wifi and port into expedition. Able to log toughbook into the vyachwifi. Unable to access the vyacht setup page via 192.168.10.1.
Once I get that part squared away, what selection and settings will I use in expedition?
Thanks in advance, calling vyacht now.
V/R,
Shane
Update: step 1 sorted. Still need an assist getting expedition setting sorted to receive vyacht.
Last edited by Crocodile (Today 6:16 am)