Expedition Navigation Software 
1 of 1
- nsmart
- Contributor
Offline - Registered: 11/04/2022
- Posts: 5
AIS targets through Yacht Devices NMEA 2000 Ethernet Gateway (YDEN-02)
Hi all,
Has anyone found a way to get AIS targets working on Expedition through the Yacht Devices NMEA 2000 Ethernet Gateway (YDEN-02)?
I seem to be having no luck. All other Data seems to be fine.
If anyone has an idea setup wise or has worked this out before, I'd appreciate some advice.
Cheers
Last edited by nsmart (12/05/2023 2:51 pm)
- Nick
- Moderator
Offline
- Registered: 9/16/2015
- Posts: 2,778
Re: AIS targets through Yacht Devices NMEA 2000 Ethernet Gateway (YDEN-02)
Yes, it does work. What are you using as the data format?
If NMEA 2000, make sure you have the relevant PGNs enabled to be received in Exp.
- nsmart
- Contributor
Offline
- Registered: 11/04/2022
- Posts: 5
Re: AIS targets through Yacht Devices NMEA 2000 Ethernet Gateway (YDEN-02)
Hi Nick,
Thanks for getting back to me.
This is how i am set up at the moment.
- •
Thread Starter- Nick
- Moderator
Offline
- Registered: 9/16/2015
- Posts: 2,778
Re: AIS targets through Yacht Devices NMEA 2000 Ethernet Gateway (YDEN-02)
That should work, if there is any AIS data.
You might not want twd & tws if you are already getting it from the B&G. Similarly, you probably don't want to send a lot of the data being sent if it is already on the network form the H5000.
1 of 1