I started using the YDW-02 and found that it would stop working for random periods and then start working again. I swapped it for a replacement unit and found the same behavior.   Then I got the NGT-1 and found it to be quite a bit more reliable, but it still goes out randomly.  When it is out I usually can see the raw data just like Graham, but there is nothing I can do to get it to display.  

GrahamCostello wrote:

Yacht devices was working with Expedition 11. Now not working with V12.0.19.  I can see the raw data entering Expedition using the TCP option, but data is not displaying in Expedition chart, boxes, or strip charts.Any advice?

So, today I just ran into the same issue with Exp V12.0.20 on a new machine.  I've been testing a Yacht Device wifi gateway which worked well under Exp V11..... but now does not display boat position data or other.  I see the sentences under raw data but no graphic for boat position or data in number boxes. 

Yacht Devices RAW checked.  Correct ip address (obviously!) and correct PGN's, double checked against my other machine.  BTW, I'm using UDP connection, which seems to be the default setting.

I have to test the other machine on the boat to see if I am missing something in Windows (which would not be a surprise!).  But, came here to check as well.

 

Last edited by Hitchhiker (8/02/2024 7:31 pm)

I am still having issues displaying boat position and number box data with the YD wifi gateway for NMEA2000.  I see the raw data.  Has anyone figured out a fix for this?


 

Chart image:

The device is set up for both 0183 and RAW data. 

I got it working today.  Settings n the YD connection page;

Network protocol: UDP.  Data Protocol: RAW.  Port 1456.  Direction: Both.
 

Last edited by Hitchhiker (9/13/2024 6:50 am)