Expedition Navigation Software 
1 - Rhino
- Expert
Offline - Registered: 5/17/2016
- Posts: 50
Digital Yacht iKonvert - configure
I have a iKonvert feeding my boat PC via USB
What is the best mode to set the iKonvert to, NMEA 0183 or 2000?
What are the correct settings in expedition?
Thanks
- Nick
- Moderator
Offline
- Registered: 9/16/2015
- Posts: 2,964
Re: Digital Yacht iKonvert - configure
If you can use NMEA 2000, then that would be better and faster.
Digital Yacht says their RAW data format is compatible with Exp. I have ordered a iKonvert to test, but freight is very slow down-under at present. Everyone seems to have covid.
- Rhino
- Expert
Offline
- Registered: 5/17/2016
- Posts: 50
Re: Digital Yacht iKonvert - configure
Interesting
what would the instrument configuration settings look like?
David
- •
Thread Starter- Nick
- Moderator
Offline
- Registered: 9/16/2015
- Posts: 2,964
Re: Digital Yacht iKonvert - configure
Try the Yacht Devices option. It may be the same.
- Nick
- Moderator
Offline
- Registered: 9/16/2015
- Posts: 2,964
Re: Digital Yacht iKonvert - configure
Update. My iKonvert arrived.
It seems I need to get Exp to tell it to send NMEA 2000 RAW data. It can't be too hard.
It also needs the dip switches changed from the default NMEA 0183 to RAW mode.
Last edited by Nick (4/03/2022 9:15 pm)
- Rhino
- Expert
Offline
- Registered: 5/17/2016
- Posts: 50
Re: Digital Yacht iKonvert - configure
Great, keep me posted on what you discover
I will be on the boat today
I will let you know what I discover
- •
Thread Starter- barne
- Expert
Offline
- Registered: 9/01/2017
- Posts: 48
Re: Digital Yacht iKonvert - configure
Nick wrote:
Update. My iKonvert arrived.
It seems I need to get Exp to tell it to send NMEA 2000 RAW data. It can't be too hard.
It also needs the dip switches changed from the default NMEA 0183 to RAW mode.
Isn't Actisense Ascii output actually NMEA2000 RAW data?
- Nick
- Moderator
Offline
- Registered: 9/16/2015
- Posts: 2,964
Re: Digital Yacht iKonvert - configure
Yes, but the NMEA 2000 data packets are encapsulated in different ways, depending on the device.
Have Rx working for the iKonvert now, will (hopefully) look at Tx today.
- Rhino
- Expert
Offline
- Registered: 5/17/2016
- Posts: 50
Re: Digital Yacht iKonvert - configure
Can you share the Rx settings on here?
David
- •
Thread Starter- Nick
- Moderator
Offline
- Registered: 9/16/2015
- Posts: 2,964
Re: Digital Yacht iKonvert - configure
Just select Digital Yacht RAW as the instrument type in Exp.
You need to set the iKonvert DIP switches as per the manual.