Expedition Expedition Navigation Software

You are not logged in. Would you like to login or register?



5/31/2021 5:05 am  #1


User channel on NX2 system (NMEA 0183)

How can I send the Alternating Channels to the three user channels in NX2 (TBS, CAD, CFD) ?
Expedition 4D 11.9.6.0

 

5/31/2021 1:42 pm  #2


Re: User channel on NX2 system (NMEA 0183)

Select Garmin NX2 NMEA as the instrument type, then click the Garmin NX2 NMEA settings button.

 

6/01/2021 5:29 am  #3


Re: User channel on NX2 system (NMEA 0183)

I have done that, but cannot see any option to address the 3 user channels. I am using NMEA0183, not FDX (as this never worked with my environment), but as per manual it should work also in NMEA mode.

     Thread Starter
 

6/01/2021 1:28 pm  #4


Re: User channel on NX2 system (NMEA 0183)

You need to select the Garmin NX2 NMEA option is the instrument type.

 

Board footera

 

Powered by Boardhost. Create a Free Forum

Interested in advertising here? Over a thousand active navigators and Expedition users visit this forum. Click here to contact the administrator.