New Digital Yacht AIT300 with WiFi.  - Mission to connect GPS and AIS to Expedition through WiFi

I successfully have Network 0 Open, Instruments chosen as "NNEA 0183 AIS", UDP to IP address connection, address 192.168.1.11, Port 2000, Use GPS data box checked, Validate Checksums box checked

I do see Raw Data coming through including RMC GGA GLL which i believer are possition reports - but I do not have any evidence that Expedition is using all the data i.e. I can see AIS targets on the chart but no GPS position fix is indicated.  It looks like dispite the fact that GPS Data box is checked that the GPS position is not beeing used by Expedition.

How do I enable GPS data behond checking the box?
Thanks

Last edited by peterbecker (5/19/2019 1:02 pm)