Expedition Navigation Software 
1 of 1- DMcKindsey
- Expert
Offline - Registered: 9/25/2015
- Posts: 10
Unable to get data from Nexus server
Good day. We have been using Expedition for several years with our Nexus-based instrument system without issue, but have been unable to receive Nexus data since up(?)grading to Windows 10. Any suggestions?
- DMcKindsey
- Expert
Offline
- Registered: 9/25/2015
- Posts: 10
Re: Unable to get data from Nexus server
More information: we still receive AIS data, but no FDX data. We are also using the Nexus Race Box with server data streamed through the race box.
- •
Thread Starter- olsen370
- Expert
Offline
- Registered: 1/03/2016
- Posts: 28
Re: Unable to get data from Nexus server
if you connect the PC to the racebox -> check the configuration rpn4.cfg file for these setting:
; The next parameter allows you to control whether or not race data is sent out
; of the RP4N through the USB port. If set to Y, data would be sent out for use
; by the Nexus Race software, or other software, such as Expedition. The data sent
; is FDX. This parameter may be set to Y or N and defaults to N (data not sent).
;
SEND_DATA_OUT_USB = Y
;
;
; The next parameter allows you to control whether or not commands from the Nexus
; race software (or any other software you are suing) are received by the RP4N through
; the USB port. If set to Y, then the software will be able to command the server as if
; it was directly connected to the server. This means you can use Race software features
; like calibration while the RP4N is in use.
;
GET_DATA_IN_USB = Y