Expedition Navigation Software 
This forum is hosted for free by Boardhost. Create your own free forum!
1 of 1- Sail2fast
- Contributor
Offline - Registered: 7/10/2021
- Posts: 6
BSP periodically spikes to 0.00 after upgrade to 12.4.6
This is with B&G 5000 system over HLink. boatspeed jumps momentarily to 0 every 5-10 seconds. yesterday restarting expedition fixed it. today it seems persistent. other inputs are behaving normally.
Any suggestions?
thanks!
- Nick
- Moderator
Offline
- Registered: 9/16/2015
- Posts: 3,189
Re: BSP periodically spikes to 0.00 after upgrade to 12.4.6
The trick will be finding out what is sending 0 to Exp.
I would look at other connections you have etc.
Why use HLink instead of the websocket?
- Sail2fast
- Contributor
Offline
- Registered: 7/10/2021
- Posts: 6
Re: BSP periodically spikes to 0.00 after upgrade to 12.4.6
my mistake, we are in fact using websocket. i will try to find out what else could be sending 0
- •
Thread Starter- Nick
- Moderator
Offline
- Registered: 9/16/2015
- Posts: 3,189
Re: BSP periodically spikes to 0.00 after upgrade to 12.4.6
If you have a NMEA 2000 connection, make sure you only select the data you want from that.
- Sail2fast
- Contributor
Offline
- Registered: 7/10/2021
- Posts: 6
Re: BSP periodically spikes to 0.00 after upgrade to 12.4.6
Yacht devices NMEA 2000 gateway is definitely the culprit. Didn’t immediately find out why, but racing to Hawaii right now and we don’t need it so I just turned it off. Will debug later, thanks for the help. (Will make sure BSP sentences are not turned on, btw)
- •
Thread Starter