There was a post from 2016 about Expedition sending data to the NKE WiFi Box.  I am having a similar problem with the NKE Box N2K.

I have the USB from the N2K box hooked to my Nav computer.  Expedition sees the COM port, and when I set the baud rate at 115,200 it generates the raw data.  BUT it only shows PNKEP 05, plus a bunch of standard NEMA 0183 sentences. I can not see the Target BSP, etc that the manual says it outputs.  The 2016 post said these were sent automatically for NKE.

I also went into the custom settings and set Targ Bsp as Custom O and targ TWA as custom 1 - still didnt see these in the raw data file.

When I go into the NKE multigraphic - the only custom data sources it shows are current speed and current direction. - I do not have those selected as outputs anywhere I can see in Expedition.  The NKE Toplink software also shows current speed and direction as the only 2 KEP data streams.

I also tried using the NMEA connections from the Box N2K via an Actisense USG-2 at 38,400 baud - same issue - it would not show the targets that Expedition is meant to automatically send to the NKE instruments.

The lights on the Box N2K are showing data being transferred on both the USB and NEMA channels.

This is an exert of the raw data file$IIZDA,214339,05,05,2024,,*55$IIRSA,-45.6,A,,V*63$IIMTW,32.1,C*13$IIMWV,180,R,0.0,N,A*2A$IIVWR,180,R,0.0,N,0.0,M,0.0,K*5E$IIRSA,-45.4,A,,V*61$PNKEP,05,0.0,0.20,N,0.37,K*68$IIRSA,-45.6,A,,V*63$IILWY,A,0.0*2D$IIRSA,-45.4,A,,V*61$IIVPW,0.00,N,0.00,M*52$IIVTG,0,T,,M,0.09,N,0.17,K,A*0B$IIRSA,-45.6,A,,V*63$IIZDA,214340,05,05,2024,,*5B$IIRSA,-45.4,A,,V*61$IIVHW,316.8,T,326,M,0.00,N,0.00,K*40$IIHDG,326,,,,*50$IIHDM,326,M*3B$IIRSA,-45.6,A,,V*63$IIRSA,-45.3,A,,V*66$IICUR,A,0,1,,0,T,0.2,,,,,*4C$IIRSA,-45.6,A,,V*63$IIRSA,-45.4,A,,V*61$IIZDA,214341,05,05,2024,,*5A$PNKEP,05,0.0,0.20,N,0.37,K*68

Am I missing something??