Offline
Hi I'm setting up a new system with a new B&G Hercules. but i'm missing a lots of functions in the instrunents section which i used to have with the H5000 Hercules such as polar transfers,wind calibration, extrenal channels etc.... the systeem receive all the data from the processor, i see the raw data coming in, so their is a connection, I can log to the Hercules form the PC without any issues.
Connection ; B&G websocket
Version Expedition : latest
Ip address of PC and Hercules processor are fixed
All is connected using a Teltonika router
Any ideas why this is not working ?
Offline
It should work (I had it operating as it should 10 days ago). I'd contact B&G to solve.
Offline
Hi All, no luck so far, no response from B&G, tried to re-install the software without success, remove the router in between the processor and the PC using fixed Ip address (Firewall issues), nothing. Could a pin code on the process block functions ?
Port used 2053
Last edited by rogier (4/07/2024 11:00 am)
Offline
Another possibility is the H5000 level. The Hydra version can't do some things.
Offline
This the new Hercules processor,
What is the the difference compared to the H5000 hercules.
thx
Offline
Sorry, what is the Hercules level?
Offline
Hi Nick,
to the best of my knowledge their is no level anymore, you just buy the processor(called hercules), i did not find anywhere an menu to unlock different level like Hydra/hercules or hercules performance which is still with the H5000 Processor.
Offline
I think you are right - there are just Edge, Hercules, HerculesWtp and Expansion as processor types.
Which version of Exp? The current release works with my Hercules.
Offline
Hi, is there a solution to the problem? I have the same problem:
I can access the Hercules via PC and web-interface. In Expedition I use the websocket i/0. But Expedition doesn't recieve any data.
Offline
Does the interface in Exp say if the port is open or closed?
Is there anything in the raw data window?
Last edited by Nick (4/14/2024 11:24 am)