Expedition Navigation Software 
1 of 1- MB2
- Contributor
Offline - Registered: 9/21/2020
- Posts: 8
raymarine sea talk NG via NMEA 2000 Wi-Fi Gateway YDWG-02
I use a gateway from yacht device to use expedition (wifi).
There is lots of difference between the boat data and what i see on expedition. There is a latence and the data are not the same.
Do you know how it is possible?
- Nick
- Moderator
Offline
- Registered: 9/16/2015
- Posts: 2,742
Re: raymarine sea talk NG via NMEA 2000 Wi-Fi Gateway YDWG-02
The data should appear in (eg) Expedition number windows within fractions of a second of it being received.
So, if there is any appreciable latency, it will probably be in the YD.
- MB2
- Contributor
Offline
- Registered: 9/21/2020
- Posts: 8
Re: raymarine sea talk NG via NMEA 2000 Wi-Fi Gateway YDWG-02
what do you suggest as a better connection with raymarine seatalkng?
i want to change for a hard connection
- •
Thread Starter- Nick
- Moderator
Offline
- Registered: 9/16/2015
- Posts: 2,742
Re: raymarine sea talk NG via NMEA 2000 Wi-Fi Gateway YDWG-02
The other option in an Actisense NGT-1. I believe they sell one with a SeataklNG connector.
- MB2
- Contributor
Offline
- Registered: 9/21/2020
- Posts: 8
Re: raymarine sea talk NG via NMEA 2000 Wi-Fi Gateway YDWG-02
if i don't want to use wifi anymore but a cable.
what do you suggest?
- •
Thread Starter- Nick
- Moderator
Offline
- Registered: 9/16/2015
- Posts: 2,742
Re: raymarine sea talk NG via NMEA 2000 Wi-Fi Gateway YDWG-02
The NGT-1 uses a USB cable.