Expedition Navigation Software 
1 - Rhino
- Expert
Offline - Registered: 5/17/2016
- Posts: 50
Shading
OK, next dumb question.
I want to display GRIB values as shading, settings, weather, wind 10m does not display an option for shading.
How do I get values to display as shading?
Thanks
- Ernie M
- Moderator
Offline
- Registered: 11/05/2015
- Posts: 411
Re: Shading
Go to Weather Tab, then Settings on the left end of the tool bar, tick Wind 10M, tick Contour, Shading, set Line Width =1, Shade/size max =30, and Contour stem=2
Leave the Arrow set to barbs until you get a feel for the colour code
- Rhino
- Expert
Offline
- Registered: 5/17/2016
- Posts: 50
Re: Shading
When I go to the weather tab, settings 10m, there is no tick box for shading, just fade and contour.
- •
Thread Starter- Ernie M
- Moderator
Offline
- Registered: 11/05/2015
- Posts: 411
Re: Shading
I see this I left out "colour mode = spectrum"
As to the tick box difference do you have the latest upgrade?
Easy to check for latest upgrade in the Exp dropdown in the top left corner...
- Rhino
- Expert
Offline
- Registered: 5/17/2016
- Posts: 50
Re: Shading
latest version.
very odd, the tick boxes in weather settings simply do not have the shading boxes
- •
Thread Starter- Ernie M
- Moderator
Offline
- Registered: 11/05/2015
- Posts: 411
Re: Shading
Do other items have a 'shading' selection and did you try hitting 'defaults'
- Rhino
- Expert
Offline
- Registered: 5/17/2016
- Posts: 50
Re: Shading
No other items have shading section either.
Have hit defaults
- •
Thread Starter- Rhino
- Expert
Offline
- Registered: 5/17/2016
- Posts: 50
Re: Shading
Reset solved it, now beautiful
coloured maps are mine for the asking.....
- •
Thread Starter- Elyxir
- Member
Offline
- From: Santa Cruz
- Registered: 4/24/2016
- Posts: 2
Re: Shading
I have the same issue, weather settings only have options for fade and contour, no shade or color setting options. How did Rhino "reset". I have restarted. running Expedition 10.4.14