Expedition Expedition Navigation Software

You are not logged in. Would you like to login or register?



1/25/2017 6:00 am  #1


Connecting Vesper xb8000 to Expedition

Hi. Can you please tell me the settings in expedition to connect the vesper ais through wifi. The vesper is communicating with the computer ok. I have tried going to instrument; serial and network ports: selected Network 0, selected vesper in instruments, selected UDP to IP address, inserted the IP address, inserted the port number .... cannot get any raw data.

I have tried other combinations but without success.

 

1/25/2017 11:32 am  #2


Re: Connecting Vesper xb8000 to Expedition

Maybe try UDP TX & Rx

 

5/07/2018 11:20 am  #3


Re: Connecting Vesper xb8000 to Expedition

Anthony - were you able ever to get this working.  We have the same set up with the same problem.  No problem with the wifi connection but we can't get the data into Expedition.  I've done this on my iPad and can get the data into iNavX without any problems.  There's got to be some setting in Expedition that we're missing....

 

5/07/2018 4:35 pm  #4


Re: Connecting Vesper xb8000 to Expedition

You want to select NMEA 0183 AIS as the instrument type. The Vesper one may work, but it is really for another use.

The manual suggests 192.168.15.1 port 39150 is the default. It doesn't say if this is UDP or TCP.

https://downloads.vespermarine.com/docs/XB_InstallGuide_20171017-web.pdf

 

5/07/2018 4:45 pm  #5


Re: Connecting Vesper xb8000 to Expedition

Thanks Nick - we'll give that a try.

 

5/12/2018 3:57 pm  #6


Re: Connecting Vesper xb8000 to Expedition

We are having the same non-connect problem  in trying to get data into Expedition through Vesper wi-fi. Instrument settings have been: NMEA 0183 AIS, address: 192.168.15.1, port: 39150. Have tried both UDP and TCP client. Are there any other hidden settings that we don't know about? At times the screen populates with AIS targets, but but then nothing and no data stream.

 

5/12/2018 6:59 pm  #7


Re: Connecting Vesper xb8000 to Expedition

It will say whether Exp is connected or not near the top left of the instrument connection page.

You can also look at the raw data window from there to see if data is being received.

 

5/17/2022 5:22 am  #8


Re: Connecting Vesper xb8000 to Expedition

jmdillow wrote:

We are having the same non-connect problem  in trying to get data into Expedition through Vesper wi-fi. Instrument settings have been: NMEA 0183 AIS, address: 192.168.15.1, port: 39150. Have tried both UDP and TCP client. Are there any other hidden settings that we don't know about? At times the screen populates with AIS targets, but but then nothing and no data stream.

 

 

5/17/2022 5:26 am  #9


Re: Connecting Vesper xb8000 to Expedition

So I am fascinated, did you get the Vesper XB 8000 hooked up to Expedition? I am in the process. It is May 17 2022. I am hooking up by doing by USB and then I try NMEA 2000. It sounds tuff. The aerial, did you use their antenna. I have a Shakespeare vhf and AIS antenna I am about to use.

 

5/17/2022 1:52 pm  #10


Re: Connecting Vesper xb8000 to Expedition

I have a Vesper here I use to test AIS on. It works with both NMEA 0183 AIS and also connected to the NMEA 2000 network. It isn't an XB 8000, but should be much the same.

For the USB connection, you probably want to select NMEA 0183 AIS in Exp. Make sure you have the VDM mesage selected to receive

 

Board footera

 

Powered by Boardhost. Create a Free Forum


Interested in advertising here? Over a thousand active navigators and Expedition users visit this forum. Click here to contact the administrator.