Expedition Expedition Navigation Software

You are not logged in. Would you like to login or register?



5/11/2018 6:05 am  #1


AIS data over Com 3 (Actisense-USB-SeatalkNG)

Trying to simultaneously feed AIS data over Com 3 (Actisense-USB-SeatalkNG) while receiving simultaneously receiving instrument data (from Sailmon) over Network 0.

Any help appreciated.  

Network 0, Open
Sailmont (Instruments)
UDP (Connection)
255.255.255.255 (Address)
5010 (Port)
Not checked (Tx on port +1)
0 (Boat (0 def)
Redirect incoming data to UDP broadcast=
5000
checked (Broadcast received data)
checked (Use GPS data)
checked (validata) checksums

Any help much appreciated.  Racing tomorrow...  More importantly trying/needing to solve in next week.

I believe the basic issue is 1) getting the data over the USB/Actisense 2) Receiving ONLY the AIS data, not conflicting data to instruments over the USB/Actisense...  Can't remember how (if possible) to specify which data comes from where.

Again...  ANY help much appreciated...

 

Board footera

 

Powered by Boardhost. Create a Free Forum


Interested in advertising here? Over a thousand active navigators and Expedition users visit this forum. Click here to contact the administrator.