Expedition Expedition Navigation Software

You are not logged in. Would you like to login or register?



7/07/2016 4:40 am  #1


Unable to get data from Nexus server

Good day. We have been using Expedition for several years with our Nexus-based instrument system without issue, but have been unable to receive Nexus data since up(?)grading to Windows 10. Any suggestions?

 

7/08/2016 4:49 am  #2


Re: Unable to get data from Nexus server

More information:  we still receive AIS data, but no FDX data. We are also using the Nexus Race Box with server data streamed through the race box.

     Thread Starter
 

9/15/2016 2:41 pm  #3


Re: Unable to get data from Nexus server

if you connect the PC to the racebox -> check the configuration rpn4.cfg file for these setting:

; The next parameter allows you to control whether or not race data is sent out
; of the RP4N through the USB port. If set to Y, data would be sent out for use
; by the Nexus Race software, or other software, such as Expedition. The data sent
; is FDX.  This parameter may be set to Y or N and defaults to N (data not sent).

SEND_DATA_OUT_USB = Y
;
;
; The next parameter allows you to control whether or not commands from the Nexus
; race software (or any other software you are suing) are received by the RP4N through 
; the USB port. If set to Y, then the software will be able to command the server as if 
; it was directly connected to the server. This means you can use Race software features 
; like calibration while the RP4N is in use.
;
GET_DATA_IN_USB = Y

 

Board footera

 

Powered by Boardhost. Create a Free Forum


Interested in advertising here? Over a thousand active navigators and Expedition users visit this forum. Click here to contact the administrator.